FUJITSU M Server M5000 - Manual (Page 27)

Capacity on Demand (COD) Administration 15
▼ To Display Usage Statistics for COD Resources
1. Log in to the XSCF console with platadm or platop privileges, or domainadm,
domainop , or domainmgr privileges for a specific domain.
2. Execute the showcodusage command.
The output displays a summary of COD permit usage by resource type and for
each domain. For example:
To display usage statistics only for domains or resources, use the
showcodusage -p
domain command or the showcodusage -p resource
command. All COD usage information can be displayed with the
showcodusage -p all
command.
You can also use the showboards command to identify which board is a COD
board. The output from this command has a column titled “COD”. This column
contains an “n” for a non-COD board or a “y” for a COD board. For example, on
a high-end server you might see:
XSCF> showcodusage
Resource In Use Installed COD Permitted Status
-------- ------ --------- ------------- ------
PROC 0 4 0 OK: 0 available
Domain/Resource In Use Installed Reserved
--------------- ------ --------- --------
0 - PROC 0 4 0
1 - PROC 0 0 0
2 - PROC 0 0 0
3 - PROC 0 0 0
Unused - PROC 0 0 0
XSCF> showboards -v -a
XSB R DID(LSB) Assignment Pwr Conn Conf Test Fault COD
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 00(00) Assigned y y y Passed Normal n
01-0 SP Unavailable y n n Unknown Normal y
01-1 SP Unavailable y n n Unknown Normal y
01-2 SP Unavailable y n n Unknown Normal y
01-3 SP Unavailable y n n Unknown Normal y