Foundry Networks AR3202-CL - Manual (Page 123)

Foundry AR-Series Router User Guide
9 - 12 © 2004 Foundry Networks, Inc. June 2004
configure router ospf area range
This command summarizes routes at the area boundaries, producing a single route that is advertised by area
border routers.
Parameter Description
syntax:
[ no ] range networknumber < IP address > mask < netmask >
[ advertise_enum < advertise | not_advertise > ]
example:
Foundry-AR1208/configure/router/ospf/area 0# range 100.1.0.0 255.255.0.0 advertise
related commands:
applicable systems:
All models.
networknumber IP address
mask netmask
advertise_enum
advertise Advertise this range.
not_advertise Do not advertise this range.
configure router ospf area_type
configure router ospf area default_cost
configure router ospf area area virtual_link