Foundry Networks AR3202-CL - Manual (Page 142)

OSPF Configure Commands
June 2004 © 2004 Foundry Networks, Inc. 9 - 31
configure router ospf interface poll_interval
This command, used for nonbroadcast interfaces only, specifies how often the router sends hello packets from the
interface before establishing adjacency with a neighbor.
Parameter Description
syntax:
[ no ] poll_interval < n >
example:
Foundry-AR1208/configure/router/ospf/interface toBoston# poll_interval 15
related commands:
applicable systems:
All models.
poll_interval The time, in seconds
The range is 0 - 2147483647; the default is 120.
configure router ospf interface authentication
configure router ospf interface cost
configure router ospf interface dead_interval
configure router ospf interface hello_interval
configure router ospf interface neighbor
configure router ospf interface network
configure router ospf interface priority
configure router ospf interface retransmit_interval
configure router ospf interface transmit_delay