Foundry Networks AR3202-CL - Manual (Page 154)

June 2004 © 2004 Foundry Networks, Inc. 10 - 1
Chapter 10
OSPF Show Commands
Use OSPF display/show commands to display all configured OSPF information.
NOTE: The CLI commands “show” and “display” can be used interchangeably.
show ip ospf area
This command displays configuration information about an OSPF area.
Parameter Description
syntax:
area [ area_id ]
example:
Foundry-AR1208# show ip ospf area 1
area_id OSPF area ID
Enter either a decimal number or an IP address.
# show ip ospf area_id 1
Area 1
Number of interfaces in this area is 0
Area type is NORM