Foundry Networks AR3202-CL - Manual (Page 188)

RIP Configure Commands
June 2004 © 2004 Foundry Networks, Inc. 11 - 7
configure router rip interface distribute_list
This command configures the access list to be used to filter either incoming or outgoing routes for this interface.
This command is used in conjunction with the redistribute command.
Parameter Description
syntax:
[ no ] distribute_list < n > < in | out >
example:
Foundry-AR1208/configure/router/rip/interface ethernet0# distribute_list 2 in
This example sets access list >2 to be used for all inbound routes for this interface.
related commands:
applicable systems:
All models.
access_list Access list number
Enter a number.
direction Traffic flow direction
in Inbound
out Outbound
configure router rip interface authentication
configure router rip interface metric
configure router rip interface mode
configure router rip interface neighbor
configure router rip interface passive
configure router rip interface split_horizon