Foundry Networks AR3202-CL - Manual (Page 190)

RIP Configure Commands
June 2004 © 2004 Foundry Networks, Inc. 11 - 9
configure router rip interface mode
This command configures RIP mode for the specific interface.
This command is similar to the global RIP mode command, but it is only applicable to the current interface. Use
this command to override the global RIP mode settings.
Parameter Description
syntax:
[ no ] mode < n >
example:
Foundry-AR1208/configure/router/rip/interface ethernet0# mode 1
This example configures interface Ethernet 0 for RIP version 1.
related commands:
applicable systems:
All models.
mode Enter a mode value.
1 RIP version 1
2 RIP version 2 (default)
3 RIP version 2 (V1 compatible)
configure router rip interface authentication
configure router rip interface distribute_list
configure router rip interface metric
configure router rip interface neighbor
configure router rip interface passive
configure router rip interface split_horizon