Foundry Networks AR3202-CL - Manual (Page 203)

Foundry AR-Series Router User Guide
11 - 22 © 2004 Foundry Networks, Inc. June 2004
configure router rip timers flush
This command configures the global RIP flush timer.
This is the time interval in seconds that must pass before the route is removed from the routing table. This value
should be configured to be greater than the configured holddown time value.
Parameter Description
syntax:
[ no ] flush time < n >
example:
Foundry-AR1208/configure/router/rip/timers# flush 300
This example configures the global RIP flush timer to 300 seconds.
related commands:
applicable systems:
All models.
time Flush timer value in seconds
The range is 1 - 65535; the default is 180.
configure router rip timers holddown
configure router rip timers update