Foundry Networks AR3202-CL - Manual (Page 21)

Foundry AR-Series Router User Guide
2 - 6 © 2004 Foundry Networks, Inc. June 2004
Figure 2.4 ? Help Screen
NOTE: The default parameters for specific commands appear in parenthesis.
Global Commands
All show, ping, and save commands are available from any level of the CLI. For example, the global show
commands allow the user to view current configuration settings, alarms, or tests without exiting the configure
mode. In Figure 2.5 on page 2-7, a user has displayed a bundle summary while configuring a new bundle.
Similarly, the ping and save commands are available at any level of the CLI command. The ping command
verifies connectivity between the Foundry system and other network hosts; access to the save commands from
anywhere in the CLI ensures that your configurations may be saved periodically.
# ?
NAME
xcli -- This is root and not a command
SYNTAX
COMMANDS <cr#
DESCRIPTION
COMMANDS -- Any of the following commands can be used
clear -- access clear commands
configure -- configure from ( flash / network / terminal )
debug -- accesses debug commands
dir -- directory of files in flash
erase -- access erase filesystem commands
file -- access file commands
mtrace -- multicast trace route to source address
password -- Change the user password
ping -- invoke ping
reboot -- reboot the system
reload -- reboot the system
save -- save configuration to ( local / network )
show -- access show commands
tclsh -- To invoke TCL shell
telnet -- open a telnet connection
test -- access test commands
trace -- trace route to destination address or host name
write -- write to terminal/network/flash
#