Foundry Networks AR3202-CL - Manual (Page 240)

Security Features
June 2004 © 2004 Foundry Networks, Inc. 15 - 15
Step 12: Display firewall policies in the internet map (applicable only if firewall license is
enabled):
Step 13: Display firewall policies in the internet map in detail (applicable only if firewall license
is enabled):
Step 14: Configure firewall policies to allow transit traffic from remote LAN to the local LAN
(applicable only if firewall license is also enabled):
Router1# show firewall policy internet
Advanced: S - Self Traffic, F - Ftp-Filter, H - Http-Filter,
R - Rpc-Filter, N - Nat-Ip/Nat-Pool, L - Logging,
E - Policy Enabled, M - Smtp-Filter
Pri Dir Source Addr Destination Addr Sport Dport Proto Action Advanced
--- --- ----------- ---------------- ----------------- ------ --------
1000 in any any ike PERMIT SE
1024 out any any any any any PERMIT SE
Router1# show firewall policy internet detail
Policy with Priority 1000 is enabled, Direction is inbound
Action permit, Traffic is self
Logging is disable
Source Address is any, Dest Address is any
Source Port is any, Service Name is ike
Schedule is disabled, Ftp-Filter is disabled
Smtp-Filter is disabled, Http-Filter is disabled
Rpc-Filter is disabled, Nat is disabled
Bytes In 0, Bytes Out 0
Policy with Priority 1024 is enabled, Direction is outbound
Action permit, Traffic is self
Logging is disable
Source Address is any, Dest Address is any
Source Port is any, Dest Port is any, any
Schedule is disabled, Ftp-Filter is disabled
Smtp-Filter is disabled, Http-Filter is disabled
Rpc-Filter is disabled, Nat is disabled
Router1/configure# firewall corp
Router1/configure/firewall corp# policy 1000 in address 10.0.2.0 24
10.0.1.0 24
Router1/configure/firewall corp/policy 1000 in# exit
Router1/configure/firewall corp# exit