Configure policy route_map, Parameter description, Configure – Foundry Networks AR3202-CL User Manual
Page 31: Policy, Route, Parameter description syntax, Example
Foundry AR-Series Router User Guide
3 - 8
© 2004 Foundry Networks, Inc.
June 2004
configure policy route_map
This command configures the policy for router route maps.
Route maps are used for general-purpose matching of routes and setting of route attributes. Each route_map is
comprised of one or more route_map clauses, of the form shown below.
route_map name number [ permit | deny ]
match statements
set statements
A route_map clause is said to match if each of its match statements matches, according to the rules given below.
A route_map is said to succeed if one of its permit clauses clauses matches, and fails if one of its deny clauses
matches. Matching proceeds sequentially and stops at the first match. If the route_map succeeds, the actions
specified by the set statements in the matched clause are performed.
If neither permit nor deny is specified, the default is permit.
Match statements can be:
•
match as_path
•
match community
•
match ip ip_address
Set statements can be:
•
set as_path
•
set community
•
set local_preference
•
set metric
•
set origin
•
set distance
•
set metric_type
Parameter
Description
syntax:
[ no ] policy route_map name number [ action < deny | permit > ]
example:
Foundry-AR1208/configure# policy route_map Block100 1 permit
name
Route map name
number
A sequence to insert to or delete from exiting route map.
The range is 0 - 65535.
action
deny
Deny the route map.
This is the default value.
permit
Permit the route map.