Foundry Networks AR3202-CL - Manual (Page 40)

Policy Commands
June 2004 © 2004 Foundry Networks, Inc. 3 - 17
configure policy route_map set distance
This command sets the BGP protocol preference for the path attribute.
Parameter Description
syntax:
[ no ] set distance distance < n >
example:
Foundry-AR1208/configure/policy/route_map Block100 1# set distance 20
related commands:
applicable systems:
All models.
distance Default preference value
The range is 0 - 255.
configure policy route_map set as_path
configure policy route_map set community
configure policy route_map set local_preference
configure policy route_map set metric
configure policy route_map set metric_type
configure policy route_map set origin