Furuno CSH-84 - Manual (Page 18)

1-8
Remote Control Box
1 2 3
DISP SELECT
DATA
EVENT TGT LOCK
ESTIMATE
1
NET COURSE
FISH
OFF-
CENT
TX
1 2 3 4
FUNCTION
5
–
+
RANGE
+
–
GAIN
SHOOT MEMO
TGT
SLICE
RECALL
AUTO
AUTO
VERT
SCAN
TILT TRAIN
SCAN DEPTH
Each press displays water
temperature or depth at screen
center for about five seconds.
Turns on transmitter.
Shifts trackball mark.
1-3: Same as 1-3 on main panel.
4-5: Same as - and + on main panel.
Displays the net shooting mark.
Saves picture to memory card.
Present a four (or five) angle view of
echo inside estimate mark. Light switch
to start.
Varies the tilt angle of the
sounding beam between -5
°
and 60
°
.
Automatically tillts sounding
beam in 2
°
steps within tilt
angle selected by the WIDTH key.
Not used.
Not used.
Adjusts receiver sensitivity.
Selects display range.
Press to enter mark
shown on key or shift
screen center.
ises/lowers the transducer.
: Raises transducer.
: Mid protrusion
: Full protrusion
elects which display unit to
ontrol in multiple display unit
stallation.
Replays a stored picture.
➡
➡
➡
Figure 1-5 Remote control box