Furuno CSH-84 - Manual (Page 48)

5-8
DATA SET Menu Description
The DATA SET menu can be display by pressing MENU + d .
For help, press the HELP key.
Menu Item Description
COLOR CURVE Sonar 1
Sonar 2
Echo Sounder 1
Echo Sounder 2 For each of these devices you may change
settings of echo level versus presentation color
curve, which you selected at either "CURVE"
at SIGNAL PROCESS on data setting
window or system menu. Note that Sonar 2 is
not used.
l. First select item to change on COLOR
CURVE sub menu, and then press the
MENU key.
2. Color curve can be changed at colors no. 4,
8, 11, 13 and 15. Press up or down arrow
key to set cursor on color no. you want to
change curve.
3. Press the right or left arrow key to change
value.
4. Press the END key to terminate color
curve setting. Then, the display shown
below appears. Follow the instructions on
the screen.
Color curve setting is completed.
To save change and close the menu, press
MENU key.
To cancel change and close the menu, press
END key.
(Continued on next page)
,,,,
,,,,
,,,,
,,,,
,,,,
15
13
11
8
4
0
0 0 128 255
Display
color
Level
setting
255
193
104
58
18
Level
C
o
l
o
r
B
a
r