First Alert FA120C - Manual (Page 14)

Р 1 4 Р
BYPASSING PROTECTION ZONES
Using the
КК6КК BYPASS Key
L I M I T A T I O N
The system will not
allow fire zones to be
bypassed.
All bypasses are removed
when an OFF sequence
(security code plus OFF)
is performed.
This key is used when you want to arm your system with one or more
zones intentionally unprotected. The system must be disarmed first.
1. Enter your security code and press the BYPASS key.
2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 06, 10,
13, etc.). Single digit zone numbers must be preceded by a zero (e.g.
05, 06) .
3. When finished, the keypad will display a "Bypass" message along
with each bypassed zone number, accompanied by a beep for each.
Wait for these zones to be displayed, to confirm their bypass.
4. Arm the system as usual.
Bypassed zones are unprotected and will not cause an alarm if
violated while your system is armed.
A B
C D
OFF AWAY STAY
MAXIMUM TEST BYPASS
INSTANT CODE CHIME
READY
1 2 3
4 5 6
7 8 9
* 0 #
{
THESE KEYS
NOT PRESENT
ON ALL
KEYPADS
TO BYPASS ZONES:
• ENTER CODE
• PRESS BYPASS KEY
• ENTER ZONE Nos.
TYPICAL KEYPAD
WAIT FOR
BYPASSED
ZONES TO BE
DISPLAYED
BEFORE ARMING
06 AC
BYPASS
READY