First Alert FA120C - Manual (Page 22)

Р 2 2 Р
CHIME MODE
Using the
КК9КК CHIME Key
This feature can be used
only while the burglary
system is disarmed.
Y our system can be set to alert you to the opening of a door or window
while it is disarmed by using CHIME mode. When activated, three tones
will sound at the keypad whenever a protected door or window is opened.
Pressing the READY key will display the open points.
To turn Chime Mode on, enter the security code and press the CHIME
key. The CHIME message will appear.
To turn Chime Mode off, enter the security code and press the CHIME
key again. The CHIME message will disappear.
PANIC KEYS
Using
Panic Keys
(for manually activating
silent and/or
audible alarms)
TO INITIATE A PANIC
FUNCTION AT ANY TIME
OF DAY OR NIGHT:
Press an active lettered key
for at least two seconds.
or
Press both keys of an active
pair at the same time.
Your system may have been programmed to use special keys or combi-
nations of keys to manually activate emergency (panic) functions. The
functions that might be programmed are: Silent Emergency, Audible
Emergency, Personal Emergency, and Fire.
A silent emergency will send a silent alarm signal to the central station,
but there will be no audible alarms or visual displays.
An audible emergency will sound a loud, steady alarm at your
keypad(s) and at any external sounders that may be connected (ALARM
plus a zone number would also be displayed).
A personal emergency
alarm will send an emergency message to the
central station (if connected) and will sound at keypad(s), but not at
external bells or sirens.
A fire alarm will send a fire alarm message to the central station and will
uniquely sound at keypad(s) and external bells and sirens (FIRE plus a
zone number would also be displayed).