If something goes wrong, Before you call for service, Problem possible causes what to do – GE DCXR453 User Manual

Page 14

Advertising
background image

15

If Something Goes Wrong

Before you call for service

Dryer Doesn’t Start

Dryer Doesn’t Heat

Dryer Shakes Or
Makes Excessive Noise

Greasy Spots On Clothes

Lint On Clothes

Dryer is unplugged

•

Make sure the dryer plug is pushed

completely into the outlet.

Fuse is blown/circuit

•

Check the house fuse/circuit breaker

breaker is tripped

box and replace fuse or reset breaker.
NOTE:

Most electric dryers use two breakers.

Problem

Possible Causes

What to Do

Lint filter is full

•

Clean lint screen before each load.

Improper sorting

•

Sort lint producers (like chenille) from

lint collectors (like corduroy).

Static electricity can attract lint

•

See suggestions in this section under STATIC.

Overloading

•

Separate large loads into smaller ones.

Paper, tissue, etc. left in pockets

•

Empty all pockets before laundering clothes.

Improper use of fabric softener

•

Follow directions on fabric softener package.

Drying dirty items with

•

Use your dryer to dry only clean items. Dirty

clean ones

items can stain clean items and the dryer.

Clothes were not completely

•

Sometimes stains which cannot be seen when

clean

the clothes are wet “appear” after drying. Use

proper washing procedures before drying.

Some shaking/noise is normal.

•

Move dryer to an even floorspace, or adjust

Dryer may be sitting unevenly

as necessary until even.

Fuse is blown/circuit breaker

•

Check the house fuse/circuit breaker box

is tripped, the dryer may

and replace fuse or reset breaker.

tumble but not heat

Gas service is off

•

Make sure gas shutoff at dryer and main

shutoff are fully open.

Advertising
This manual is related to the following products: