Garmin GPSMAP 78sc - Manual (Page 31)

GPSMAP 78 Series Owner’s Manual 27
Customizing Your Device
removing a Page
1 From the main menu, select Setup >
Page Sequence.
2 Select a page.
3 Select remove.
4 Press EnTEr.
Customizing the Unit
Settings
You can customize units of measure for
distance and speed, elevation, depth,
temperature, and pressure.
1 From the main menu, select Setup >
Units.
2 Select a setting.
3 Select a unit for the setting.
4 Repeat steps 2–3 for each setting
you want to customize.
Time Settings
From the main menu, select Setup >
Time.
• Time Format—allows you to select a
12-hour or a 24-hour display time.
• Time Zone—allows you to select
the time zone for the device. You
can select automatic to set the time
zone automatically based on your
GPS position.
Position Format Settings
nOTE: Do not change the position format
or the map datum coordinate system
unless you are using a map or chart that
specifies a different position format.
From the main menu, select Setup >
Position Format.
• Position Format—sets the position
format in which a given location
reading appears.