Broiler pan and grid, Control panel, Probe – GE JT91530 User Manual

Page 25: Racks, Probe racks

Advertising
background image

25

Safety Instructions

Operating Instructions

Care and Cleaning

Tr

oubleshooting T

ips

Consumer Support

Oven Racks and Convection Roasting Rack

Clean the oven racks (including the
offset rack) and the convection roasting
rack with an abrasive cleanser or steel
wool. After cleaning, rinse the racks and
rack with clean water and dry with a
clean cloth.

NOTE: The oven racks and convection roasting
rack may be cleaned in the self-cleaning oven.
However, the racks will darken in color, lose their
luster and become hard to slide if cleaned during
the self-cleaning cycle. You can wipe the rack
supports with cooking oil after self-cleaning to
make the racks slide more easily.

Roasting rack

Oven rack

Offset rack (27

″ models only)

Probe

The temperature probe may be cleaned
with soap and water or a soap-filled
scouring pad. Cool the temperature
probe before cleaning. Scour stubborn
spots with a soap-filled scouring pad,
rinse and dry.

Do not immerse the temperature probe
in water.

Do not store the temperature probe in
the oven.

www.GEAppliances.com

Broiler Pan & Grid

Do not clean the broiler pan or grid in a
self-cleaning oven.

After broiling, remove the broiler pan
from the oven. Remove the grid from the
pan. Carefully pour out the grease from
the pan into a proper container.

Wash and rinse the broiler pan and grid
in hot water with a soap-filled or plastic
scouring pad.

If food has burned on, sprinkle the grid
with detergent while hot and cover with
wet paper towels or a dishcloth. Soaking
the pan will remove burned-on foods.

Both the broiler pan and grid may be
cleaned with a commercial oven cleaner.

Both the broiler pan and grid can also be
cleaned in a dishwasher.

Do not store a soiled broiler pan and grid
anywhere in the oven.

After broiling, remove the broiler
pan from the oven.

Oven Heating Elements

Do not clean the broil element. Any soil
will burn off when the element is heated.

The bake element is not exposed and
is under the removable oven floor. If
spillovers, residue or ash accumulate
on the removable oven floor, wipe up
before self-cleaning.

To clean the bake element area, take out
the removable floor (see the Removable
Oven Floor
section) and gently lift the
bake element. Clean with warm soapy
water. Always replace the removable floor
before next use.

NOTE: Failure to replace the removable floor will
adversely affect the cooking performance.

Control Panel

It’s a good idea to wipe the control
panel after each use. Clean with mild
soap and water or vinegar and water,
rinse with clean water and polish dry
with a soft cloth.

Do not use abrasive cleansers, strong
liquid cleansers, plastic scouring pads or
oven cleaners on the control panel—they
will damage the finish. A 50/50 solution
of vinegar and hot water works well.

Advertising
This manual is related to the following products: