GE JT91530 - Manual (Page 26)

26
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Before You Call For Service…
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem Possible Causes What To Do
Control signals after You forgot to enter a bake • Press the BAKE pad and desired temperature or the
entering cooking time temperature or cleaning SELF CLEAN STD/LOW pad and desired clean time.
or delay start time.
Food does not bake Oven controls improperly set. • See the Using the oven section.
or roast properly
Rack position is incorrect • See the Using the oven section.
or the rack is not level.
Incorrect cookware or • See the Using the oven section.
cookware of improper size
being used.
Oven floor not in place. • Replace the oven floor.
Oven thermostat needs • See the Adjust the oven thermostat—Do it yourself!
adjustment. section.
Food does not Oven controls improperly set. • Make sure you press the BROIL HI/LO pad.
broil properly
Improper rack position • See the Broiling Guide.
being used.
Food being cooked • Use the broiling pan and grid that came with your oven.
in a hot pan. Make sure it is cool.
Cookware not suited • Use the broiling pan and grid that came with your oven.
for broiling.
The probe is plugged into the • Unplug and remove the probe from the oven.
outlet in the oven.
Aluminum foil used on the • See the Using the oven section.
broiling pan and grid has
not been fitted properly and
slit as recommended.
In some areas the power • Preheat the broil element for 10 minutes.
(voltage) may be low.
• Broil for the longest period of time recommended in
the Broiling Guide.
Clock and timer A fuse in your home may be • Replace the fuse or reset the circuit breaker.
do not work blown or the circuit breaker
tripped.
Oven controls improperly set. • See the Using the clock, timer and control lockout
section.
Oven light does Light bulb is loose or defective. • Tighten or replace the bulb.
not work
Pad operating light is broken. • Call for service.