Garmin ZUMO 200 - Manual (Page 41)

zūmo 200 Series Owner’s Manual 
Customizing the zūmo
while receiving traffic signals from the
service provider.
1. From the Menu page, touch Tools >
Settings > Traffic .
2. For North American units, touch Add .
For non‑North American units, touch
Subscriptions > Add .
3. Write down the traffic receiver unit ID.
4. Go to
www.garmin.com/fmtraffic to
purchase a subscription and get a
25‑character code.
5. Touch next on the zūmo, enter the
code, and touch Done .
The traffic subscription code cannot be
reused. You must obtain a new code
each time you renew your service. If you
own multiple traffic receivers, you must
obtain a new code for each receiver.
restoring All Settings
1. Touch Tools > Settings .
2. Touch restore .
3. Touch Yes .