Replacing the remote control batteries – Epson EX21 User Manual

Page 64

Advertising
background image

64

Maintaining the Projector

Replacing the Remote Control Batteries

Replace the batteries in the remote control as described below:

1. Turn the remote control over.

2. Press in on the catch on the battery cover as you lift the cover off.

3. Install two AA alkaline batteries, inserting the

+

and

–

ends as

shown.

4. Replace the battery cover and press it down until it clicks into

place.

caution

When replacing batteries,
take the following
precautions:

■

Replace the batteries as

soon as they run out. If the
batteries leak, wipe away
battery fluid with a soft
cloth. If fluid gets on your
hands, wash immediately.

■

Do not expose batteries to

heat or flame.

■

Dispose of used batteries

according to local
regulations.

■

Do not use batteries other

than those specified in this
User’s Guide and do not
use batteries of different
types or mix old and new
batteries.

■

Keep these batteries out of

the reach of children.
Batteries are choking
hazards and are very
dangerous if swallowed.

Advertising