Garmin GDL 30 - Manual (Page 26)

 GDL 30/30A Owner’s Manual
M
aIn
M
enu
XM Tab
To display the XM tab, press and hold the ADJ/MeNU key to display the Menu Menu. Using the ROCKeR, scroll through the tabs and highlight the XM tab.The
XM tab contains two sub tabs, Audio and Information. The Audio sub tab is used to tune and customize the XM Radio feature (only available on GDL 30A). The
Information sub tab contains the Radio ID numbers and information about the XM service being received.
Audio (for GDL 30A only)
The Audio sub tab provides access to the XM Radio feature. From this tab, stations can be scanned, selected, and added to a Favorites List. Also, the Audio Output can
be turned on and off. If the GDL 30A is properly connected, the Audio Output should be set to On. If CHECK ANTENNA appears in the Tuning field, double-check
to make certain the GA 31 antenna has been properly installed and that the audio cable is securely connected to your GDL 30A and to your stereo receiver. For more
information on using the XM Radio feature, refer to the chartplotter Owner’s Manual.
If your GDL 30A s properly connected, you wll see “On”
n the Audo Output box and “XM Prevew” n the Rado
Tunng box.
Audio Tab