Minolta PageWorks/Pro 18 - Manual (Page 147)

7.5 Troubleshooting Checklists
7-12
Operation and Troubleshooting
Chapter 7
7.5.3 Troubleshooting AppleTalk Protocol
• Is the Macintosh computer connected to the network through
Ethernet, and, has the Macintosh AppleTalk driver been selected?
Go to the
Control Panel , then go to Networks to check.
• Did you select the correct NIC and correct zone?
• Is AppleTalk enabled on the Macintosh?
Use Chooser to check this.
• If you are on a network with multiple zones, is the zone correct?
• Did you select the correct printer driver in Chooser? You must first
select the printer icon and then select the printer name.
Note
• If you placed the printer in a new zone, did you reselect the zone?
• Are other printers with similar names in Chooser? Make sure you
chose the NIC-connected printer.
• Not all printers can communicate with the default Macintosh driver.
PageWorks.book Page 12 Tuesday, August 4, 1998 11:21 AM