Miele T 1313 - Manual (Page 32)

Determining the position of the
exhaust connection
The exhaust connection can be left at
the rear of the dryer (factory standard)
or moved to the left or right side of the
dryer.
Changing the position of the exhaust
connection
^ Remove the exhaust connection
cover on the left or right side of the
dryer.
^ Do this by inserting a screwdriver into
each raised flap and lifting upwards,
as shown.
This cover is no longer needed.
^ Press the supplied cover firmly into
the rear opening.
^ To remove the cap insert a
screwdriver between the machine
and the cap and lift upwards, the cap
will then pop out of place.
Installation
28