Turning on and off, Shutdown and hardware reset, How do i monitor the battery status – Mio 300-Series User Manual

Page 13

Advertising
background image

Mio Moov 200-Series, 300-Series | Getting to know your Mio

13

Turning on and off

For normal operation, turn off your Mio by sliding the power switch to the OFF position. Your Mio enters a suspended
state. To use it again, slide the power switch to the ON position. Your Mio will be back to where you left off.

Moov 200-Series

Moov 300-Series

Shutdown and hardware reset

Occasionally, you may need to perform a hardware reset when your Mio stops responding; or appears to be “frozen”
or “locked-up.”

You can perform a hardware reset by shutting down your Mio and then turning it back on. To shut down your Mio,
slide the power switch to the RESET position. To turn on your Mio after shutting it down, slide the power switch to the
ON position.

How do I monitor the battery status?

Your Mio has an internal battery that when fully charged, should provide power for up to 3 hours.

The battery indicator light on the top of the Mio indicates the level of internal battery charge:

ƒ

Green

- battery full

ƒ

Orange

- battery charging

You can monitor battery power status on the Power screen.

Note: The battery may not be fully charged when you use your Mio for the first time.

To access the Power screen, tap

and hold

on the map screens.

How do I charge the battery?

The Battery Status bar displays External Power while the battery is charging; when the battery is fully charged, the
Battery Status bar will display at 100%.

ƒ

To charge your Mio in a vehicle, plug the in-vehicle charger into

on the bottom of your Mio and the other

end into the vehicle power socket.

ƒ

To charge your Mio using your computer, plug the large end of the USB cable directly into a USB port on your
computer (not a USB hub) and plug the small end into

on the bottom of your Mio. To begin charging,

ensure your Mio is turned off.

ƒ

To charge your Mio using a mains power socket, plug the mains power charger cable into

on the bottom of

the Mio and the mains power charger power pack into the power socket.

Note: The mains power charger is not included with all models and may be purchased separately.

Advertising
This manual is related to the following products: