MSI RG300EX - Manual (Page 26)

M S I R G 3 0 0 E X （ L i t e )
The wizard will now save the settings and will close the screen automatically.
3.5 Finishing the installation procedure of your wireless
router
After following chapter 3, you can finish the installation procedure by following the next
steps:
1. Remove the UTP network cable from your computer.
2. Remove the UTP networking cable from the LAN port of your RG300EX（Lite).
3. Restart your computer.
4. Congratulations! You have properly installed the RG300EX（Lite).
An explanation how to connect your wireless network using Windows XP and Windows Vista can be found
in chapter 6.0
3.6 Configuration as an Access Point
Install the RG300EX（Lite) as an access point if you have a router or DSL modem router. Make sure that
your Internet browser and your network are well configured when configuring manually. You can assume
that the settings are correct, unless you have changed any of the settings in the past.
Example of RG300EX（Lite) as an Access Point
Page 25 of 52