Miele T8013C - Manual (Page 32)

Rear view
a Handle for transportation (arrows)
b Air intake opening to cool the
condenser
c Power cord with plug
d Condensate drain hose
e Accessories for connection to a sink
standpipe
Installation site
,
Do not install the dryer in an area
where it can be blocked, e.g. behind
a door.
,
This appliance is not intended to
be mounted in a wall or other
vertical surface of a building or
cabinet. The unit is allowed for
built-in application.
Transporting the dryer to the
installation site
The rear excess end of the lid has a
handle box for transport.
^ Use the front dryer feet and the rear
excess end to transport the dryer
from the packaging base to the
installation site.
Installation
28