Miele G 1150 - Manual (Page 29)

With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue Possible fault Solution
The Start/Stop indicator
does not flash after the
dishwasher is turned on
with
s .
The machine is not
plugged in. Insert the plug.
The fuse has tripped. Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The dishwasher stops
during a program. The fuse has tripped. Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The program cycle
indicators "Rinse",
"Drying" and "End"
flash at the same time. There may be a technical
fault. – Turn the dishwasher off
s.
After a few seconds:
– Turn the dishwasher
on.
– Select the desired
program with the
program selector
button.
– Press the "Start/Stop"
button.
If the problem persists,
call Technical Service.
The drain pump is
running when the door
is open. The waterproof system
has activated. – Turn off the water
supply.
– Call Miele Technical
Service.
Frequently asked questions
29