Selecting categories for display on the map, Setting alarms, Setting alarm parameters – Magellan RoadMate 1415 User Manual
Page 37
Points of Interest
28
Selecting Categories for Display on the Map
A POI file must be loaded (see Loading a POI File) for this function to operate.
1.
From the Main Menu, tap the Points of Interest icon.
2.
Select My POIs.
3.
Select Change My POI FIle.
4.
Select Display Categories.
5.
Use the checkbox to the left of the category name to select or deselect the category.
(Checked means this category will have its icon displayed on the map.)
Tap Mark All to check all categories or Clear All to uncheck all categories.
6.
Tap Save when done.
Setting Alarms
A POI file must be loaded (see Loading a POI File) for this function to operate.An enhanced POI can
have an alarm that will alert you when you are in range set by “Alert Parameters.” Note that all
POIs in the categories selected will have their alarms set to on. A POI file must be loaded (see
Loading a POI File) for this function to operate.
1.
From the Main Menu, tap the Points of Interest icon.
2.
Select My POIs.
3.
Select Change My POI FIle.
4.
Select Set Alarms.
5.
Use the checkbox to the left of the category name to select or deselect the category.
(Checked means this category will have its alarms turned on.)
Tap Mark All to check all categories or Clear All to uncheck all categories.
6.
Tap Save when done.
Setting Alarm Parameters
An enhanced POI can have an alarm that will alert you when you are in range set by “Alert
Parameters.” Note that all POIs in the categories selected will have their alarms set to on. A POI
file must be loaded (see Loading a POI File) for this function to operate.
1.
From the Main Menu, tap the Points of Interest icon.
2.
Select My POIs.
3.
Select Change My POI FIle.
4.
Select Set Alarms.
5.
Select the category from the category list whose alarm parameters are to be changed.
6.
Set the detection angle, the first warning and the last warning by tapping on the button with
the current setting.
7.
Use the keypad to enter in new values and tap OK.
8.
Tap Save when done.