Miele TOUCHTRONIC T 8002 - Manual (Page 18)

What if the dryer will not run?
Possible fault Solution
The "Start/Stop" button was not
pressed. Make sure the dryer is on. Press the "Start/
Stop" button to begin the drying program.
The circuit breaker tripped or
the dryer is unplugged. Make sure the dryer is plugged in or reset the
circuit breaker.
The door is not closed. Close the door properly.
How do I prevent static cling?
Add fabric softener to laundry when washing or select the "Less Dry" setting on
the dryer.
What if the drum light does not come on?
Possible fault Solution
The bulb may be bad or burned
out. See "Changing the light bulb."
What if the "Child Lock" indicator flashes after turning the dryer on and a
program cannot be started?
Possible fault Solution
The child lock is activated. Deactivate the child lock. See "Child Lock."
What if the program stops, the "Anti-crease / End" indicator lights and the
buzzer sounds?
Possible fault Solution
The drum is empty. Load laundry into the dryer. The dryer will not
operate if the drum is empty. Single items
should be dried with "Sturdy" or a timed
program. For dry items use the "Fluff" program.
What if the "Filter/Vent" fault indicator is lit?
Possible fault Solution
The lint filter is clogged. Clean the lint filters. See "Dryer care".
The exhaust hose or the
connection is clogged with lint. Remove lint and check the exhaust system for
blockages.
The air supply in the room is
insufficient. Open a window or door to increase airflow.
Frequently asked questions
18