Miele DA329-1I - Manual (Page 32)

4. Hang the cabinet door
Before installing the appliance, hang
and align the cabinet door.
5. Position the appliance in the
cabinet
^ Lift the venting hood into the cabinet,
making sure that the supports on the
venting hood are sitting on the
runners in the cabinet.
6. Align the height of the
appliance
^ Screw 3 knurled screws into the
install bracket on each side. Do not
tighten the middle one.
^ Adjust the hood height with the front
and rear screws.
^ Align the appliance at the lower edge
of the cabinet side panels so that a
gap of
1
/
8
" (3 mm) is left on each
side.
Installation
32