Miele DA329-1I - Manual (Page 33)

7. Installation of a lightshield
DFB lightshield (optional accessory)
Follow the installation instructions
supplied with the DFB lightshield. Use
the screws supplied with the lightshield.
Custom made lightshield
^ Fit the deflector plate handle into the
openings on the deflector plate.
^ Secure the handle in place with the 2
screws (3.0 x 15 mm) through the
underside of the deflector plate.
^ Stick the three lengths of double
sided tape to the custom lightshield
and stick it to the deflector plate
handle as shown above.
^ Dismantle the deflector plate handle
with the attached lightshield.
^ Secure the lightshield to the deflector
plate handle using (5) 3.0 x 15 mm
screws, two at either side and one in
the middle.
^ Reattach the lightshield to the
deflector plate.
Installation
33