Miele DA329-1I - Manual (Page 36)

12. Light cover
^ Pull the deflector plate slightly out.
^ Tilt the front of the external filter
slightly down and out.
^ Insert the two holders on to the sides
of the light cover.
^ Secure the light cover using (2)
3.5 x 9.5 mm self-tapping screws.
Reinserting the external filter:
^ Remove the protective film from the
the filter frame.
^ Make sure that the red plastic guides
are at the front and facing up.
^ Insert the external filter into the
extended deflector plate from below
and hold it in position.
^ Push the filter gently upwards and
push the deflector plate in. The filter
will slide into the holders.
^ Push the filter backwards so it snaps
into place.
Installation
36