Motorola S1201 - Manual (Page 29)

Using additional handsets 29
On the handset:
1. Press
m
, scroll
d
to REGISTER and press
m
.
2. Scroll
d
to REG BASE and press
m
.
3. Enter the base number (1 - 4).
The base numbers that are already in use flashes. The
display shows
SEARCHING... .
4. When the handset finds the base signal, the display
shows SEARCHING...X , where X indicates the base
identification number.
5. The display will ask for the PIN to be entered. Enter the
4 digit PIN code (default = 0000) and press
m
.
You will hear a beep if the registration is successful.
The handset is automatically assigned an available
handset number. Use this number when making
internal calls.
NOTE
If registration is not successful the first time, please repeat
the process again in case the base registration period ran
out of time. If the base is not found after a few seconds, the
handset returns to standby. Try registering again.
If there are already 5 handsets registered to the base, the
registration will fail. You must de-register another handset
before you can register a new one.
9.2 Register a different make of handset
to your S12 base
IMPORTANT
DECT GAP Profile only guarantees that basic calling
functions will work correctly between different makes/types
of handset and base. There is a possibility that certain
devices such as Caller ID will not work correctly.
On the base:
1. Press and hold
a
for 3 seconds until you hear two
beeps. The base will remain in registration mode for 90
seconds.
On the handset:
Follow the registration instructions given in your handset’s
user guide.
9.3 Select a base
If your S12 handset is registered to more than one base (e.g.
one at work and one at home), you can select which base to
use.
Each handset can be registered with up to four bases.
1. Press
m
, scroll
d
to REGISTER and press
m
.
The display shows SELECT BASE .