Miele DA 362-75 - Manual (Page 19)

Active charcoal filters
In recirculation mode four active
charcoal filters must be used in
addition to the grease filters. The
charcoal filters are designed to absorb
cooking odors. They are located in the
canopy above the grease filters.
Active charcoal filters can be ordered
from Technical Service.
USA 1-800-999-1360
CDN 1-800-565-6435
Please quote part # 03 174 713
^ The grease filters must be removed
to acces the active charcoal filters
(see "Cleaning and Care / Grease
filters").
^ Insert the charcoal filters and fasten
with the enclosed screws.
^ Return the grease filters.
Before using:
^ Program the charcoal filter timer, see
"Operation/Reprogramming the
charcoal filter timer".
Replace the active charcoal filters when
the charcoal filter indicator lights. These
filters should be replaced at least every
6 months or when they no longer
absorb odors efficiently.
^ After replacing the charcoal filters,
press and hold the charcoal filter
button for 3 seconds to reset the
timer. The indicator light will go out.
^ If the charcoal filters are replaced
before the timer has reached its
maximum, the charcoal filter button
should be pressed for 6 seconds to
reset the counter to zero.
Cleaning and care
19