Miele DA 362-75 - Manual (Page 20)

Changing the light bulb
Before changing the light bulb,
disconnect the hood from the power
supply by either removing the fuse,
unplugging it, or manually "tripping"
the circuit breaker.
When in use halogen bulbs become
extremely hot, and they can burn
your hands. Do not attempt to
change the bulbs until they have
had sufficient time to cool down.
Do not touch the bulb surface.
Fingerprints or body oils deposited
on the bulb will decrease the life of
the bulb.
Follow the bulb manufacturer’s
instructions.
^ Remove the grease filter.
^ Loosen the bulb’s fixing screw and
slide it downwards.
^ Tighten the screw.
^ Turn the bulb to the left and pull it
downwards.
^ Install the new bulb in reverse order.
^ Return the grease filters.
Cleaning and care
20