MirOil 690HS - Manual (Page 5)

Assembly of models 690HD / HS
Division of Oil Process Systems Inc.
602-20 North Tacoma Street Allentown, Pennsylvania 18103
PHONE: 610 437-4618 FAX: 610 437-3377 E-mail: [email protected] Web: www.miroil.com
Step 1
Attach the Wheel
Assembly to the
Handle and Hot Oil
Pump Assembly.
Use the Allen wrench
and Allen screws in
the nutserts in the
handle.
Step 2.
Insert tube at end of hose (from hot oil
pump suction) into the socket on the side of
the Filter Basin until the tube is fully seated.
Step 3.
Remove pin, turn &
remount crank
handle from
shipping position to
the correct position
for pumping.
Reinstall pin.
Step 4.
Carefully attach the
quick coupling on the
end of the Discharge
Hose to the mating
fitting on the
pump/handle
assembly
The Filter Machine is ready for use.
Be sure to read the instructions
before placing machine into service.
Assembled
Model 690HS
Assembled
Model 690HD
R e t u r n t o m a i n m e n u