Miele DA252-3 - Manual (Page 16)

Changing the light bulbs
Before changing the light bulbs,
disconnect the hood from the power
supply by either removing the fuse,
unplugging it, or manually "tripping"
the circuit breaker.
When in use halogen bulbs become
extremely hot, and they can burn
your hands. Do not attempt to
change the bulbs until they have
had sufficient time to cool down.
Do not touch the bulb surface.
Fingerprints or body oils deposited
on the bulb will decrease the life of
the bulb. Please follow the bulb
manufacturer’s instructions.
Overhead light
^ To change the halogen bulb first
remove the lamp cover,
a.
^ Pull the bulb, b, out of its socket and
replace with a new one.
^ Now return the lamp cover, a.
Never use the lighting without the
lamp cover,
a, in place. The glass is
specially made to filter harmful light
rays.
Indirect lighting
^ Remove the two screws securing the
light cover.
^ Carefully raise the front of the bulb
and pull it out of its socket.
^ Insert the new bulb into the socket
and lower it into its holder.
^ Replace the light cover and the two
screws.
Cleaning and Care
16