Overview (continued), Bottom side, Remote control – MITSUBISHI ELECTRIC XD210U User Manual
Page 7
EN-7
ENGLIS
H
Overview (continued)
Bottom side
1
Adjustment feet
2
Lamp cover
Remote control
1
ON button
2
KEYSTONE/VOLUME UP, DOWN buttons
3
MENU button
4
Direction buttons
5
ENTER button
6
COMPUTER button
7
VIDEO button
8
FREEZE button
9
AV (Audio/Video) MUTE button
10 ASPECT button
11 AUTO POSITION button
12 STANDBY button
•
The UP and DOWN buttons are used in the KEY-
STONE adjustment in addition to the volume control.
Important:
•
This projector is equipped with two remote controls.
One is installed on the top of the set; the other is
come with the package.
•
To release it from the set, press the remote control
lock button, and the remote control will eject automat-
ically. See step 1 of the illustration.
•
To fix the remote control to the set, place the remote
control into the remote control slot. See step 2 of the
illustration.
•
Be sure to remove the transparent insulation tape by
pulling it before use. For further details, please refer
to the section "Remote control".
•
If you don't want to remove the remote control from
the set, or prevent it from dropping accidentally, you
can use Cap RC lock button that came with the pack-
age to lock the remote control lock button.
•
Be sure to follow the illustration to use Cap RC lock
button to prevent dropping.
•
After installation, please follow the illustration to press
the Cap RC lock button to hook the slot of RC lock
button.
2
1
1
2
3
4
5
6
7
12
11
10
9
8
1
2
Cap RC lock button
Rib faces top.
Hook faces bottom.