Miele DAG 1000 - Manual (Page 26)

The ventilation system is installed
directly behind the cooktop.
For easiest installation, install the
ventilation system first, then the
cooktop.
The ventilation system must not be
installed in an area where there are
strong drafts, for instance near
windows, doors, etc.
Before installation, please read the
"Appliance dimensions" and
"Important safety instructions".
^ Remove the connection plate from
the front of the appliance.
Installation preparation
^ Screw the bottom mounting brackets
to the side of the housing using 2
screws each. Do not tighten the
screws. The brackets are different for
the right and the left side. Attach
them with mounting clip "A" pointing
up.
^ Remove the side screws at the top of
the housing, put the top mounting
brackets in place and screw them
into place.
Installation
26