Miele KM5958 - Manual (Page 77)

Installation
Flush fit hobs are only suitable for
installation in granite, marble, tiled or
solid wood worktops. Other
materials such as Corian and
Askilan are not suitable. When using
a worktop made from any other
material, please check first with the
worktop manufacturer that it is
suitable for installing a flush fit hob.
Certain models are suitable for
building into glass worktops - please
see advice under "Building-in
dimensions"
The internal width of the base unit
must be at least as wide as the
internal cut-out width for the hob
(see "Building-in dimensions"). This
is to ensure that the underside of the
hob is accessible after installation
and that the casing can be easily
removed for maintenance. If the
underside of the hob is not freely
accessible after installation the seal
underneath the hob must be
removed to enable the hob to be
lifted out of the cut-out should this
ever be necessary.
The hob can be installed
– in a suitable cut-out in a granite or
marble worktop.
– in a suitable cut-out in a tiled or solid
wood worktop or a glass worktop
with a wooden support frame. The
frame must be provided on site, and
is not supplied with the appliance.
Flush-fitted hobs
77