Conference, Swap, Call forwarding – Mitel 5330 IP Phone User Manual

Page 24

Advertising
background image

Mitel 5330/5340 IP Phones – User Guide

Conference
To form a Conference when a two–party call is already in place, or to add another party to an
existing Conference:

1. Press

(TRANS/CONF).

2. Dial the number of the next party.

3. Wait for an answer.

4. Press

(TRANS/CONF).

To leave a Conference:

• Hang up or press (CANCEL).

Swap
To call another party when you are in an established two–party call:

1. Press

(TRANS/CONF).

2. Dial the number.

To alternate between the two parties:

• Press the key you have programmed as Swap.

Call Forwarding
Call Forwarding lets you redirect incoming calls to an alternate number when your phone is busy,
when you're not answering, or all the time.

You can use the Settings key to set a global forwarding option for all calls, or to program a feature
key with a desired forwarding method. If you need one forwarding setup for Internal calls and a
different setup for External calls, use the Superkey to program Call Forwarding.

Programming Call Forward

To set a global Call Forward option for all calls:

5330 Phone:

5340 Phone:

1. Press the key that you have programmed

as Superkey.

1. Press the key that you have programmed

as Superkey.

2. Press

No until "Call Forwarding?" appears,

if necessary.

2. Press

the

More key until the Forwarding

option appears.

3. Press

Yes to select External or Internal

calls.

3. Press

the

Forwarding key.

4. Use

the

Next key to navigate through the

Call Forward categories (Always?, If Busy?,
No Ans?, etc.) and then press Pgm to
select.

4. Press the key for your desired forwarding

option (Busy, Always, To me, No Ans)

5. Enter the number to which you want your

calls forwarded and then press Save.

20

Advertising
This manual is related to the following products: