Miele DG 5080 - Manual (Page 23)

Preparing the appliance for use
^ Fill the water container with mains tap water up to at least
the "min" marker. You do not need to remove the insert.
Only use mains tap water. Never use distilled or mineral
water or other liquids.
^ Push the water container into the appliance until it
connects.
If the water container is not positioned correctly, the
appliance will not heat up and after a while
F20 will appear in
the display (see "Problem solving guide").
^ Place the food in the oven.
Selecting a function
^ Switch on the appliance s.
^ If the function displayed is not the one you want, touch one
of the illuminated sensors next to the arrows in the display
until the function you want appears.
^ Touch the sensor beside the function to select it.
Setting the temperature
^ If you want to use the recommended temperature then
confirm with "OK". If you want to change the temperature,
enter the new temperature with either - / + or the numerical
keypad. Confirm with "OK".
Setting a cooking duration
^ Enter the cooking duration you require with + / - or the
numercal keypad, e.g. 20 minutes.
^ Confirm your selection by touching "OK".
The appliance will start automatically after the duration has
been confirmed.
Brief operating instructions
23