Ingersoll-Rand LEVER IN-LINE AIR SCREWDRIVER QS1T - Manual (Page 4)

4 P7440 Edition 10
Always use an air line lubricator with this tool.
We recommend the following Filter-Lubricator-Regulator
Unit:
Inside USA use FRL unit #C28-04-FKG0-28
Outside USA use FRL unit #C28-C4-FKG0
Whenever the tool is disassembled for maintenance or
repair, lubricate the gear train with Ingersoll-Rand No. 67
Grease.
Whenever the tool is disassembled for maintenance or
repair, lubricate the clutch assembly with Ingersoll-Rand
No. 28 Grease.
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and the parts be
separated by material so that they can be recycled.
LUBRICATION
Ingersoll-Rand No. 10 Gearing:
Ingersoll-Rand No. 67
Clutch:
Ingersoll-Rand No. 28
INSTALLATION
F L
R
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Lubricator
Emergency
Shut-Off
Valve
Regulator Filter
Compressor
FRL
Drain Regularly
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
(Dwg. TPD905-2)