Insignia NS-LDVD26Q-10A - Manual (Page 27)

21
www.insigniaproducts.com
3 Press or to highlight Auto Channel Search,
then press or . The Auto Search menu opens.
4 Press or to highlight the TV signal source
you are using. You can select:
• Antenna—VHF and UHF channels.
• Cable—Cable TV channels (no cable box).
• Cable/Satellite box—Cable or satellite TV
tuner box. If you are using a box, you do not
need to scan for channels. If you select this
option, your TV/DVD combo will not scan for
channels.
5 Press OK/ENTER to start scanning. Your
TV/DVD combo scans for channels in your
viewing area and stores the channel information
in the channel list. When the scan is complete,
your TV/DVD combo tunes to the first channel
in the channel list.
Selecting the signal source
To select the signal source:
1 Press TV MENU, then press or to highlight
the Channel icon. The Channel menu appears.
2 Press to access the Channel menu.
3 Press or to highlight Antenna/Cable, then
press or . The Antenna/Cable menu opens.
4 Press or to highlight Antenna or Cable.
5 Press TV MENU one or more times to return to
the previous menu.
6 Press EXIT to close the menu.
Hiding channels
To hide channels:
1 Make sure that you have scanned for channels.
For more information, see “Automatically
scanning for channels” on page 20.
2 Press TV MENU, then press or to highlight
the Channel icon. The Channel menu appears.
3 Press to access the Channel menu.
4 Press or to highlight Add/Skip Channels,
then press or . The Add/Skip Channels menu
opens.
5 Press or to highlight the channel you
want to hide, then press OK/ENTER.
If the channel has a check mark next to it, the
channel is in the channel list. If you delete a
channel, the check mark disappears. If you add a
channel, a check mark appears.
6 Press TV MENU one or more times to return to
the previous menu.
7 Press EXIT to close the menu.
Note
You can press EXIT to stop the scan, but you must run
the scan again to create a complete channel list.
Note
You do not need to select the TV signal source unless
the source changed after you ran the Setup Wizard.
For more information, see “Turning on your TV for the
first time” on page 16.
Move
Select Antenna if using an antenna for standard or HD TV.
Select Previous Exit OK
ENTER MENU EXIT
Picture
Channel • Auto Channel Search
Audio Channel Settings
Choose your TV source
Antenna
Analog Channels 0
Cable
Cable/Satellite box
Digital Channels 0
Move
Adjust channel options.
Select Previous Exit OK
ENTER MENU EXIT
Picture
Channel
Antenna/Cable
Auto Channel Search
Add/Skip Channels
Favorites
Channel Label
Channel Strength
Auto Zoom Antenna
On
Audio Channel Settings
Move
Adjust channel options.
Select Previous Exit OK
ENTER MENU EXIT
Picture
Channel
Antenna/Cable
Auto Channel Search
Add/Skip Channels
Favorites
Channel Label
Channel Strength
Auto Zoom Antenna
On
Audio Channel Settings
Move
Manually add and skip channels in your program list.
Select Previous Exit OK
ENTER MENU EXIT
Picture
Channel • Add/Skip Channels
Audio Channel Settings
4.1 ─
4.2 ─
4.3 ─
4.4 ─
4.5 ─
4.6 ─
4.7 ─
4.8 ─
4.9 ─
4.10 ─