Intermec PF8T - Manual (Page 67)

Appendix B — Media Specifications
54 PF8d/PF8t Printer User’s Guide
Plain Continuous Stock
The PF8 printers can use continuous stock without any detection
slots or black marks. The printer must be set for continuous stock
by using the ESim Q command (see ESim Programmer’s Reference
Manual).
The length of each copy is decided by the size of the print image
and any additional media feed is decided by the Q command.
Continuous stock cannot be used in the Auto-Sensing mode.
Tag or strip width (a)
Maximum: 116.0 mm (4.57 in)
Minimum: 25.0 mm (1.00 in)
a
CONTINUOUS STRIP