IOGear GBHFK231 - Manual (Page 18)

18 19
Operating the Car Kit with Two Bluetooth enabled phones
Activate multi-point connection
The default setting of Car Kit’s multi-point connection is off. To turn this on, 1.
power on the Car Kit and make sure it is in standby mode. Then press and
hold “+” button for 3 seconds until hearing a beeping sound.
To turn off this feature, under standby mode, press and hold “-“ for 3 seconds
2.
until hearing a beeping sound and the Car Kit will power off automatically.
When power on the Car Kit again, it will only connect to the last connected
Bluetooth enabled cellular phone.
Note: When the multi-point feature is in use, the Car Kit does not support
three-way calling feature.