IOGear GBHFK231 - Manual (Page 7)

6 7
Charging Your Car Kit
M UT E
Before you begin using your Solar Power Bluetooth Hands-free Car kit, it
is recommended to fully charge the device to ensure optimal performance.
Using the USB cable
Plug the micro-USB connector end of the USB 1.
charging cable to the Solar Power Bluetooth Car
Kit, and the other USB Type A connector end to
any available SUB port on your computer or an AC
power adapter with USB port (not included).
The LED light on the Car Kit will light up during 2.
charging, and it will turn off when charge completes.
It will take approximately up to 3 hours to get a full
charge thru the USB port of your computer.