Indesit HI561 IXUK - Manual (Page 5)

5 GB
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Instructions for Installation
For easy installation proceed as follows:
• Fix the wall brackets and Splashback.
• Fix the canopy.
• Set the hood for recirculation or evacuation.
• Connect the hood to the mains supply and ensure that it works properly.
• Fix the telescopic metal frame.
Fixing the wall brackets (and splashback)
Ref. to Fig. 2a-b
• Draw a vertical line on the wall, from the centre of the cooking appliance up to the ceiling,
using a marking pen. This is to ensure the correct vertical alignment of many components.
Fixing the wall brackets 1:
• Put the bracket I to the wall, aligning its marked centre across the vertical line, ensuring
that the distance between the centres of the holes and the cooking area is as follows:
• Draw a horizontal line on the wall ensuring that the distance from the cooktop is as
follows:
a) when the splasback is to be installed: d = 270 mm + H, where H is the height of the
visible part of the splashback; as the splashback can be of different heights, the correct
H figure can only be obtained by measuring the actual height of the splashback to be
fitted.
b) without splashback d = 875 mm minimum.
Fig. 2
b a
243_A02
2
1
2
1
B
B
X
115
140
d
=
875
min
650
min
265
X
115
140
d
H
265
H