IBM u-1070 - Manual (Page 4)

4 EN
3
Insert the card straight in until it clicks into
place.
Do not touch the contact area directly.
4
This camera allows the user to take pictures
using the internal memory even when
no xD-Picture Card (sold separately) is
inserted. “Using an xD-Picture Card” (p. 53)
“Number of storable pictures (still pictures)/
continuous recording length (movies) in
the internal memory and xD-Picture Card”
(p. 54)
To remove the xD-Picture Card
1 2
Press in the card until it clicks and comes
out slightly, and then grasp the card to pull it
out.
Loading the battery and
the xD-Picture Card™ (sold
separately) into the camera
Never insert anything other than the
xD-Picture Card or the microSD Attachment
into the camera.
1
2
Insert the battery from the T end, with the
B symbol facing toward the battery lock
knob. If the battery is not inserted correctly,
the camera does not operate.
Insert the battery while sliding the battery
lock knob in the direction of the arrow.
Sliding the battery lock knob in the direction
of the arrow to unlock, and then remove the
battery.
Turn off the camera before opening or
closing the battery/card compartment cover.
Battery lock knob
Notch
Battery/card
compartment
cover
d4399_e_basic_000_book_cs2e.indb4 4 d4399_e_basic_000_book_cs2e.indb4 4 11/14/2008 9:50:53 AM 11/14/2008 9:50:53 AM